Canon printers have a WPS PIN on the back of the printer.
The WPS button on Canon printer MX922 is used to connect the printer to a wireless network. The process is as follows:1) Press the WPS button on the printer.2) Press the WPS button on your router.3) Wait for the lights on both the router and printer to turn solid green.
Connect your printer to the power outlet and turn it on.Open the Canon MX922 printer’s control panel by pressing the “Menu” button, then press “Setup.”Press “Wireless LAN Setup” and enter your network name (SSID).Press “Wi-Fi Protected Setup” and press the button on the back of your router to make it emit a signal.Press “OK.
Canon printers come with a WPS PIN, which is typically located on the back of the printer. The WPS PIN is a wireless network setup that can be used to set up a wireless connection without using a computer.
The WPS PIN is located on the back of the printer, near the power cable.
The Canon printer has a WPS button that can be pressed if the printer is connected to a Wi-Fi network. The button can also be pressed if the printer is not connected to a Wi-Fi network but the computer is.
You will need to connect the printer to your router using an Ethernet cable. Once the printer is connected, you can use the Canon Print and Scan Doctor software to wirelessly connect it to your network.
Turn on the printer and wait until the Wi-Fi light is blinking.Launch your browser and type in 192.168.1.1, which will take you to the printer’s web browser interface.Click on “Network Settings” and change the IP address to 192.168.0.100 (or any number between 192.168.0.1 to 192.168.0.254).
The WPS button on a Pixma printer is the button that will connect to your wireless network.
